What Grit Sandpaper for Drywall
Drywall sanding is a critical step that determines the quality of your finished walls. Even the smoothest joint compound application can appear rough if the sanding is not done properly. Knowing what grit sandpaper for drywall to use at different stages ensures that your surface becomes paint-ready and professional. The process is not about force but about control.
When done correctly, drywall sanding blends seams, gets rid of ridges, and results in a flawless, professional-looking surface ready for painting.
Understanding Grit Numbers for Drywall
The grit number on sandpaper shows how coarse or fine the abrasive surface is. A coarser number means the sandpaper is coarse and removes material quickly, while a larger number provides a smoother finish. Choosing the right grit size for drywall prevents damage such as paper tearing, deep scratches, or uneven patches.
If the grit is too coarse, it can expose joint tape or leave swirl marks that affect the final appearance. If it’s too fine too early, it can fail to remove ridges effectively. The goal is to move in a stepwise progression of grits for a seamless finish.
Recommended Sandpaper Grit for Drywall Stages
Professional drywall finishers typically follow a progressive grit progression to achieve optimal results:
• 100–120 grit: Used for initial sanding to remove uneven spots after joint compound application. This grit should be used gently to prevent surface tearing.
• 120–150 grit: Used for intermediate sanding once the major imperfections are removed. This grit provides the main shaping and blending phase.
• 180–220 grit: Best for pre-paint sanding. It creates a consistent surface without imperfections.
This sequence ensures each layer of compound is evenly finished, resulting in a durable wall.
Must-Have Drywall Sanding Tools
Using proper tools is as important as selecting the right grit. Quality equipment helps maintain consistent sanding results, reduces fatigue, and keeps dust under control.
Common tools include:
• Manual sanding block for touch-ups
• Extension sander for large surfaces
• Sanding sponges for corners and curved areas
• Mesh sanding sheets for airflow
• Protective gear to avoid inhalation
• Angle light for better visibility
These tools help ensure professional-quality outcomes without damaging the drywall paper.
Step-by-Step Drywall Sanding Guide
Sanding drywall is a careful process. Following professional techniques prevents common surface flaws and what grit sandpaper for drywall mud ensures your work looks seamless once painted.
1. Let the Joint Compound Dry Completely
Always wait for the compound to dry fully before sanding. Partially dried mud will smear and ruin your finish. Fully cured compound turns into fine dust when sanded, allowing for smooth sanding.
2. Apply Light, Even Pressure
Avoid pressing too hard. Let the sandpaper do the work while maintaining steady strokes. Excessive pressure can create gouges.
3. Feather the Edges
Blend the joint compound smoothly into the drywall using gentle sweeping motions. Focus on seams rather than flat surfaces to create a seamless appearance.
4. Use Angled Lighting
Shine a light across the wall’s surface to highlight imperfections that might not be visible head-on. This ensures all marks are addressed before painting.
5. Switch to Finer Grit for Final Passes
Once the wall feels flat and smooth, move to 180–220 grit sandpaper. This stage perfects the finish and prepares the wall for priming or painting.
How to Sand Drywall Corners
Corners and edges need careful sanding. Use a fine-grit sanding sponge or folded sandpaper to reach these areas. Sand one side at a time with light passes to avoid damaging the tape or paper.
For inside corners, a few light passes are usually enough to blend the edges without thinning the surface material. Careful motion is the key to maintaining joint integrity.
Common Sanding Mistakes to Avoid
Many DIY finishers make the mistake of being too aggressive or skipping crucial steps. To achieve a professional outcome, avoid the following:
• Oversanding that exposes joint tape
• Using coarse sandpaper that leaves deep scratches
• Applying uneven pressure
• Neglecting to check under light
• Not using protective gear
Steady control and gradual sanding matter more than speed during drywall sanding.
Final Steps Before Painting Drywall
Before applying paint, ensure that the wall is completely free from debris and fine powder. Wipe the surface with a slightly wet sponge or a vacuum attachment designed for drywall dust. Check all areas under angled light to confirm a consistent finish. Using fine-grit sandpaper before primer ensures a flawless and receptive surface for primer adhesion.
A properly sanded wall allows primer and paint to adhere smoothly, preventing uneven coating and ensuring a uniform appearance.
Final Thoughts
Mastering the correct drywall sanding grit to use at each stage can significantly improve the quality of your walls. Start with medium grit to remove rough patches, move to finer grits for blending, and finish with ultra-fine sanding for that paint-ready surface.
By combining the right tools, lighting, and a consistent technique, you can achieve a high-end drywall finish that looks seamless under any paint or lighting condition. Careful sanding and control are the true secrets to expert-level drywall finishing.